AndonStar AD206 - New Readable Keys (Digital Microscope)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another Mod for my new Microscope: The org. keys for manoeuvering through menus or adjusting functions was NOT…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another Mod for my new Microscope: The org. keys for manoeuvering through menus or adjusting functions was NOT readably at all. Black on black! What a pity!
So I took the microscope apart, measured the keys part and redesigned it to this thing. Now I can read and can concentrate what is under the microscope and not waht is at the microscope.
Disassembly and reassembly is easy, just need a crosshead screwdriver. Takes six
screws for main (rear) panel, then carefully open the panel with your fingernails or a
deburred small, thin spatula. Carefully open it, mind the cables!
Unscrew the poti wheel for LED brightness, then unscrew two screws of the push switches.
Check function of your printed part, probably deburr or file the keys it they stick,
reassemble and test before you close the panels. Reassembly in reversed order.
Good luck. Dont destroy your mic.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm & 2 perimeters
Infill:
25%
Filament: [Doesnt matter PLA](http://www.amazon.com/s?url=search-alias&field-keywords=Doesn%60t+matter+PLA&tag=thingiverse09-20) Doesn't matter
Notes:
Print letters first. Letters on buildplate! Second keys.
Category: Hobby