1 / 8
Repair Set Conveyor Belt Duplo (Lego) — zdjęcie 1
1 / 8

Repair Set Conveyor Belt Duplo (Lego)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a repair of a 35+ years old conveyor belt of out Duplo farm from the 85's. Prepare Instructions: From the…

Ocena
4 / 5
Polubienia
65
Pobrania
326
Wydruki
1
Wyświetlenia
3805
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a repair of a 35+ years old conveyor belt of out Duplo farm from the 85's.

Prepare Instructions:

From the yellow rollers grind off the lids on one side. Be a bit careful not ro grind off too much. Drill a hole in each roller. Try to meet the center! LOL

Print the parts: belt with TPU, rest doesn't really matter. Try what fits best. Now when the friction roller fits over the drive roller (bottom roller with crank), drill a Ø2.0mm hole where the friction roll comes to sit!!! Thread a M3 into the roller. I think one thread is enough, you maybe do not need two of them.

Assembly:

I applied some sanitary grease on the places where the rollers roll and touch plastic. Put belt in bottom position, put drive roll into hole, put friction roll over drive roll. Now insert the set crew M3, maybe add some glue for fixation. ONLY NOW stretch the belt and input upper roller. Secure both rollers with the lid and a torx or whatsoever screw.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

20%

Filament: Doesn't matter TPU, PLA Black for the belt


Notes:

Good luck. If you do a great job, your kids and/or grand-kids will thank you.

Category: Toy & Game Accessories

Tagi