Tool Sorter for CentreDrill Bits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Forget searching, forget measuring in case you quickly need a tool! As the assortment is quite individual you might…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 135
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Forget searching, forget measuring in case you quickly need a tool!
As the assortment is quite individual you might adapt it for your purpose.
I like printing in two or more colors in one layer.
Photographs show also the Centre Drill Bit holder: https://www.thingiverse.com/thing:4845319
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
20%, your choice
Filament: Doesn't matter PLA (or your choice) see photographs
Notes:
I used supports at places where I inserted the num-plates (here: centre drill bits). It may work without support, but doesn't hurt if you set supports, as the insert is quite flush! Maybe sand a stroke or two. Mine fitted perfectly. Glue it in!
Category: DIY