SLA Resin Bottle Agitator (Shaker) V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Thing is a "machine" that is for SLA resins. I have seen a YouTube video where somebody recommended to just roll…
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 162
- Wydruki
- 0
- Wyświetlenia
- 1899
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Thing is a "machine" that is for SLA resins. I have seen a YouTube video where somebody recommended to just roll the resin bottels instead of shaking. Shaking results in bubbles. That is not what you want. This machine will roll the resin bottles. 500ml and 1,000ml is adequate.
You may need to change the motor, the motor mount, the servo mount and the servo link, whereas the servo link is quite flexible designed.
This is my final version, functionally tested and Arduino implemented.
Printer: Prusa MK3
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2mm (or your choice)
Infill: your choice, I took 25%
Filament: Your choice PLA (others are your choice) Your choice
Notes: Most holes are prepared for Torx10 screws, different lengths.
Explore my other Printables: https://www.printables.com/de/@Tritschi