Raspberry Pi 4.0 Case with Camera Slot (Prusa Edition, reworked)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix from my remix from the other day. Originals from www.thingiverse.com/thing:3714695 and another Thing,…
- Ocena
- 4 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 243
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix from my remix from the other day. Originals from www.thingiverse.com/thing:3714695 and another Thing, which I unfortunately don't find at this moment.
I combined the 2Color version with the prior mentioned Thing, took the breakable slots into the second design, then shifted the Prusa text from interference area. That is all. Thanks to the two predecessors for their GOOD JOB!
New in this version are two items:
Integrated a slot for the Raspi WebCam
Enlarged and reinforced the holes for screwing both top and bottom parts together.
(3) Photographs show the print on textured build plate, which I like more than the earlier print)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Doesn't matter PLA (others are your choice) see photographs
Notes:
Part was printed in 2 (resp.3-color) mode. Black and Orange (3 layers) and White (fourth layer, white for more brilliance).
Prusa sliced. No MMU used! Six times filament change. No hard job. You can stay with the print. After approx. 50 minutes all exchanges are done, and it prints just black. So you can go to sleep! ; ))Category: 3D Printer Accessories