Box Utility Case for Brother P-Touch Labelprinter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to quit searching and searching for the right label-tape cassett over and over. Also as I use the printer…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 442
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to quit searching and searching for the right label-tape cassett over and over. Also as I use the printer with batteries it must be stored after I used it. Then the USB-cable always disturbed me hanging loosely somewhere.
So I decided to design this little helper to store the printer with two cassettes, I have 9mm in, 12mm in the attached pocket, 24mm in the other pocket. 9mm and 12mm have about same size. So either 9 or 12mm can stay in the printer.
For storing tape cassettes I recommend: https://www.printables.com/de/model/351907-brother-p-touch-tape-box-as-an-addition-of-my-prin
Here is a six pack for storimg 9mm and 12mm tapes.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0,2mm
Infill:
25%, doesn't matter
Filament: doesn't matter PLA doesn't matter
Notes:
For the Brother script plate I printed base plate in same color, script in a different color. I choose resolution here 0.1mm
Category: Organization