Replacement Holder for PWR iPad Air1 PWR Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original rubber pads were too soft and worn out over the years. I designed new ones, struggled a bit with the design…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Original rubber pads were too soft and worn out over the years. I designed new ones, struggled a bit with the design until it fitted. Eventually I got it done. Wife is happy.
Edit 05-Nov-2021: SLA printed parts did not last very long, too less tensile stress, although Flex-tye and heavy duty (Monocure). So I printed in TPU via my FFM printer. Much better!
Print Settings
Printer:
Elegoo Mars 2 Pro
Rafts:
No
Supports:
No
Resolution:
50
Infill:
100
Filament:
Monocure Resin 80%Flex + 20%Taff
translucent
Category: Electronics