Cable Management Kaercher Vacuum Cleaner (Kärcher Industriesauger)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It has always bothered me that the cable of my Kärcher vacuum cleaner hung around the cleaner and I was not really…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 933
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It has always bothered me that the cable of my Kärcher vacuum cleaner hung around the cleaner and I was not really able to wrap it around something without having it dropping down all the way. Also during transportation it was a mess. So I designed three holders. You can replace the existing screws (like my cleaner has) by approx. 15mm longer screws. That is no issue at all.
For the front holders you need to carefully drill a new hole into the cover. Be sure, not to hit something below. Maybe you better look before you drill. I took the risk and carefully drillesd. Put in two screws quite wirde and not too long. It worked (at least until today).
I strongly recommend to look under the cover prior to drill!! It is for your safety. AND: Do not drill with cable in an outlet. Remove cable before any drilling, before any assembly works! PLEASE!!
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
Low for faster printing
Infill:
50+ %
Filament: Your choice Your choice, I took PET Black or your choice
Category: DIY