Prusa FS-Cover MK3S+ (reworked)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recently changed my Prusa printer from MK3 to MK3S+. The filament-sensor cover (FS-cover) is a part where you insert…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently changed my Prusa printer from MK3 to MK3S+.
The filament-sensor cover (FS-cover) is a part where you insert the filament into the extruder. Some people reworked it for inserting a Festo connector, but this all did not work out for me. So I re-designed this Thing (org. Prusa) to have a longer leading distance into the extruder, as the filament is very often somewhat bent.
AND: ALWAYS, yes ALWAYS cut your filament end with a wire-cutter or appropriate once you unload the filament. Do not let it as it is once it comes out. You will run into troubles, if you do not.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm (quality). Prusa Slicer.
Infill:
20
Filament: Prusament PETG Black
Notes:
There are three files with this thing. If you just use "FS-Cover GT_NoArrow.stl" then all is done with one simple print. Other two are provided for two color print, which I did, but not really recommend as it doesn't bring any major advantage.
Category: 3D Printer Parts