Canon 10x30is Soft Lens Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soft lens covers/objective plugs for Canon 10x30is binoculars.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Soft lens covers/objective plugs for Canon 10x30is binoculars.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.175mm
Infill:
25% cubic
Filament: AmazonBasics TPU Black
Notes:
- 240C extruder 50C bed 30mm/s max travel speed 4 perimeters, 4 solid top and bottom layers
Post-Printing
Lots of cleanup with sidecutters to nip off any little loops, blobs, strings..
How I Designed This
Measured a few key dimensions with a dial caliper, and built up the plug profile with a bunch of cylinders in FreeCAD. Added some chamfer to improve the fit and finish.
This was also the first thing I've ever printed in TPU so it was a good learning experience.
Category: Sport & Outdoors