Astronomy Camera Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed to hold a ToupTek GPCMOS 1.25" camera on a standard 1/4-20 threaded tripod for testing purposes.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
This was designed to hold a ToupTek GPCMOS 1.25" camera on a standard 1/4-20 threaded tripod for testing purposes.
After printing, drop a standard 1/4-20 nut into the hole; superglue it if you feel so inclined.
There is a new version of this design that now includes a dovetail for a low-cost reflex sight such as those from Orion, Astromania, or Celestron.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25% 3D Honeycomb
Filament:
AmazonBasics PLA
Notes:
Print with the front of the ring on the printer bed, no supports needed.
Pretty simple design made of primitive shapes (CSG).
- Two cylinders were used to construct a tool in the shape of the camera itself.
- The intersection of three rotated rectangular prisms fused to a cylinder was used to construct a tool to make the nut holder
- A larger cylinder forms the main holder, with a rectangular prism joined to the bottom for the nut
- Tool #1 is subtracted from cylinder #3 to form a cavity for the camera body
- Tool #2 is subtracted from camera body holder #4 to form a cavity for a 1/4-20 nut
- A rectangular prism is subtracted from the top of camera body #4 to reduce friction and reduce print time.
Category: Physics & Astronomy