1 / 2
1/2" NPT union
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1/2" pipe union that screws together
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 841
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
This is an ½" pipe (schedule 40) pipe union that actually threads together with proper mating faces.
PLA
.3 resolution works but .2 is nicer on threads
avoid crossing perimeters
Depending on your printer if you use supports (not required but may need a bit of clean up after printing if you do not use them)
5-15% infill