1 / 1
Satsana Ender 5 Plus with Spider 3.0 HE and Steel BLT
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pretty simple edit to the already useful satsana configuration to fit the Spider 3.0 Hotend on the Ender 5+.
- Ocena
- 3 / 5
- Polubienia
- 19
- Pobrania
- 108
- Wydruki
- 2
- Wyświetlenia
- 1007
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (15)Powiązane
As described, this configuration lets the creality spider 3.0 fit nicely in the satsana. It also allows for more direct air flow being that it is wider that the stock hotend.
This should be useful on stock and upgraded hotend configurations.
Slicer settings:
PETG
TEMP:
Noz 250C
Bed 85C
Flow 100%
Layer Height .16mm
Print Speed 55mm
Travel 200mm
Supports Yes
Touching Buildplate
20% Support Density
Brim