Bambu P1P - X1 Top Glass Adapter

As Spotlighted by BambuLabs on their instagram (go like and follow them):

https://www.instagram.com/reel/CnFJ3GxovY9/?igshid=Yzg5MTU1MDY=

Designed for a quick usage until a full case mod can be created but gives the user a glass top to protect the Head and allow an AMS unit to be stored on top.

Things to accomplish/add:

• PFTE tube addition built-in or as an add-on option - completed
• Multiple color options for AMS unit's
• Built-in Y splitting option - completed

Easy print will require some supports orientation is up to you i would print it top down and mild supports for the overhangs and parts to give it better bed adhesion

will require a mixture of M3 and M2.5 bolts and nuts from the 8-12mm length and the occasional nut as not all holes are threaded or required i just punched holes according to the frame.

Some fit testing may be required as it is a semi snug fit to top of unit.

Will also work with my Remixed top slider and LED enclosure that's currently in development and also working on a full case enclosure mod

** Front piece's are just a placeholder for any future case designs and are just held in place with the clips and double sided tape*"

I have fit tested it ot my P1P's and they fit i did a few minor revisions that are untested but should give it more accessibility and better fits.

Print settings:

• Material Suggested: PETG but recommend ASA or ABS
• 4 T/B layers
• 3 walls
• 20-25% Gyroid Infill
• Supports on(Top Down, with Standard settings (Hybrid and Tree don't seem to work right with model)
• Brim 3mm /w 0.5mm spacing
• 75mm/s outer wall speed 

Material used :

Main Pieces: 225g+/-

Accessories: 60-75g +/-

Print time:

10hrs +/-

Associated Files:

• Ventilation Glass top: https://www.printables.com/model/348616-bambu-p1p-and-x1-top-glass-modification-w-led-chan
• Y splitter (3x6mm design)  https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec
• Spool Holder /w P4-M10 pneumatic connection: https://www.printables.com/model/356213-bambu-side-filament-arm-w-m10-thread-wip
•  

Hardware:

• x6 M4 screws (BL supplied)
• x6-8 M4x12 hex nuts
• x2 M4x14-16 hex nuts (filament holder)
• Single sided foam, or Carpet tape (what i used)
• Double sided tape (optional)
• x6 3x6mm magnets for the Y adapter add-on
• x3 M10 pneumatic fittings (x4 if using side filament holder)

---------------

Revisions:

Dec 29: 

• added more wall thickness to back by 2mm
• Adjustments to holes for better access 

Dec 30:

• Changed the model to have the ends as clips and a full center piece
• Added TPU PFTE adapter for the back of unit the gets put in between the Backer and the frame
• cleaned up the model and added a wrap around front

Dec 31:

• Completed the v2 compile and test fits were within tolerance and should print for more users
• Made minor adjustments to the total design to make pieces smaller and easier to print in the event there is a failure
• Added a few special accessories that i'll upload to the design that'll help with things like an Upper Rear Filament holder, TPU insertable PFTE tubes and a Built in Y splitter from another designer that can be used as an adapter to the design (will release these as they are officially printed and tested!

Jan 1:

• Officially released files are now live and ready for public Printing!!!
• Adjusted and Corrected the Magnetic Adapter portion to the L1 Magnetic Backer to better fit with the adapter that needs to be glued in