LayersFactory
Zgłoś model
1 / 6
Shining Winter Star — zdjęcie 1
1 / 6

Shining Winter Star

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tony MaHoney

Tony MaHoney

@TonyMaHoney

A shining star is born. In Germany it is also known as the "Herrnhuter Stern" Here I tried my own.

Ocena
0 / 5
Polubienia
21
Pobrania
57
Wydruki
0
Wyświetlenia
532
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Share Alike
SzczegółyPliki (23)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (43)Powiązane

+++ Winter Star +++

 

What do you need except the print files:

  • glue to assemble the star parts [Tri & Quad] “I used UHU for plastic parts”
  • E14 ribbon cable with a switch and a lenght of 5 meter or longer to reach a power socket
  • the light bulb socket must be dismantled
  • E14 LED bulb 4W or 6W
  • the right distance of the light bulb socket that the light source is placed concentric: “Star Cable Holder” 80/90/100 mm

 

!!!Caution!!!                                                                                                                                                     Disassembling of the light bulb socket only without electricity and at your own risk!

 

!Advises!

The 3 frame parts can be stack together without any glue.

The “Star Cable Holder” you don't have to glue! You have to stack it together. I have done it in the last step. But before stacking it together you need to disassemble the E14 socket and seperate the cables out to mount the holder between the switch and the light bulb socket! Don't forget to remove the supports of the little round clips!

With supportsRemoved supports

Now you can stack it together.

Beware that it is very difficult to disassemble this part “Star Cable Holder” without destroying it if you have glued all other pieces to the frame!

 

 

**Print Instructions**

 

*Middle Frame and Top/Bottom Frame

Supports: Yes
Resolution: 0.2mm 
Infill: 15%                                                                                                                                                   Pattern: rectlinear or cubic                                                                                                                     Brim: No

*Tri Star

Supports: No
Resolution: 0.2mm (I used variable layer hight for a little part of the top)
Infill: doesn't matter                                                                                                                                 Brim: Yes                                                                                                                                            

Vase Mode is possible but takes more time…

*Quad Star

Supports: No
Resolution: 0.2mm (I used variable layer hight for a little part of the top)
Infill: doesn't matter                                                                                                                                 Brim: Yes

Vase Mode is possible but takes more time…

*Star Cable Holder

Supports: Yes [paint-on supports the overhang of the clips an use the “Style: Snug” in options]
Resolution: 0.2mm 
Infill 1: 15% [Main Body]                                                                                                                       Infill 2: 100% [The whole clips with modifier]                                                                                       Brim: Yes

I recommend you to use the print files, that i uploaded!

I used PLA for the showen prints.

Tagi

decorationlightledchristmasstarwinterledmountledlightchristmasdecorationmerrychristmaschristmasdecorationsnightlightledlampchristmaslights