pump kit, 1/2" to gardena microdrip 10mm connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an adapter and a filter to screw on a 1/2" pipe thread on one side and clip into a 10mm Gardena microdrip tube on the…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
an adapter and a filter to screw on a 1/2" pipe thread on one side and clip into a 10mm Gardena microdrip tube on the other.
I have a small solar pump that fetches water from a buried tank, and i wanted to use the microdrip tubing. The outlet of the pump is 1/2" male thread, couldn't find anything suitable, so i drawed it.
If ever you want the openscad source, drop me a note, and i will put it up on github, to compile it, you will need https://github.com/adrianschlatter/threadlib
and https://github.com/nohkumado/scalar-rackmods
[EDIT] added the new scad files, cradle in the preparation...
Print Settings
Rafts:
No
Supports:
Yes
Category: Outdoor & Garden