3030 Ramps controlerboard case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original case for the ramps sits on top of the scalar printer, since i have some issues with the wiring, i prefer…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
The original case for the ramps sits on top of the scalar printer, since i have some issues with the wiring, i prefer to have everything down and with short cables, thus remodeling the case, since the controler has som long wires, putting it on the front makes it more accessible for me.
source on github https://github.com/nohkumado/scalar-rackmods/tree/master/controler_gehaeuse
Print Settings
Printer:
Scalar XLP
Rafts:
No
Supports:
Yes
Filament:
Amazon basic pla
Notes:
just be sure to put the thing on a flat side before slicing, my best results were lower rectangle on the bottom, otherwise uncomplicated to print....
i planned to screw the thing shut, but at least my print was so snug, that it didn't need them to stsay shut.....
Category: 3D Printer Parts