1 / 4
2023 Glasses
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2023 neon glasses to start the new year with style and be the coolest of New Year's Eve.
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 81
- Wydruki
- 3
- Wyświetlenia
- 635
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These glasses (printed with Glow filament) glow in the dark which makes them unique. You can stand out in electronic style at parties or clubs while celebrating the new year.
Simply print them as they come and mount them in a few simple steps:
- Cut small pieces (about the width of the glasses' temples) out of any other filament.
- Place the temples on the glasses holder and insert the filament.
- Use a heat source or glue to fix the small piece of filament to the sides of the temple so that it does not come out.
3D PRINTING PARAMETERS
The following settings are recommended for printing:
- Prints in the original orientation and uses support (only in the joint above the nose).
- 100% fill
- Layer height of 0.15 mm or less
I printed them with 3dJacke ecoPLA Glow filament but you can use another "Glow in the dark" filament or just use a normal colored filament.