My New Kazoo

Apr 02, 2022

This is a kazoo in 3 sizes (100mm, 120mm, 140mm).

They differ mainly in volume.

The kazoo diaphragm can be bought here, for example: https://www.amazon.de/Aluminium-Legierung-Membran-Membran-Geschenk-Box/dp/B07CPW8MMN/ref=sr_1_5?adgrpid=1195169790471701&hvadid=74698212804323&hvbmt=be&hvdev=c&hvlocphy=116555&hvnetw=s&hvqmt=e&hvtargid=kwd-74698309683005%3Aloc-72&hydadcr=28408_1859721&keywords=kazoo+diaphragm&qid=1648921915&sr=8-5

or here https://www.thomann.de/de/thomann_kazoo_spare_diaphragm.htm

Alternatively, you can make it yourself:

For this you need a very thin foil, e.g. from household garbage bags. Normal plastic foil, sandwich paper etc. are too thick.

The "KazooDiaphragmaPlate" part is glued to the foil, which is then cut off all around.

Afterwards, the purchased or self-made diaphragm can be inserted into the kazoo and fixed with the "MyNewKazooInsert".

It may be necessary to leave this a little loose so that the sound is produced correctly. You have to try out how to insert the diaphragm.

The kazoo has 2 flaps on the underside with holes for M3 screws to attach it to a microphone stand or similar.

The original is available here on Onshape: https://cad.onshape.com/documents/0f64fd03caf17075ac8c18de/w/540481d1434b304818a28046/e/757e6e55811ae9b174aabe87

Today added:

Kazoos without the flaps

Augst 4th, 2025 added:

The Kazoo-Holder for microphone arm, see images.

Print Settings

Supports: Yes

Resolution: 0,2mm

Infill: 40%

Filament: PLA

Notes:

MyNewKazoo2_Body: Support with the tree-option in Cura, printed with brim

**MyNewKazooEinsatz** and**KazooDiaphragmaPlate** with no support and only a skirt.