Pillenspender-Pill Dispenser V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of my own pilldispenserhttps://www.thingiverse.com/thing:5720588 The basic part is the same as the…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 216
- Wydruki
- 1
- Wyświetlenia
- 1652
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
December 23, 2022
This is a remix of my own pilldispenser https://www.thingiverse.com/thing:5720588
The basic part is the same as the original pill box, without modification.
I redesigned the lids to print with transparent PLA.
Transparent filament doesn't make transparent parts, unfortunately, but if they are thin enough they are at least somewhat translucent.
I put a kind of window in the lid, with 0.4mm thickness. There you can at least see if the corresponding box is empty.
In addition, each lid has a slot in which you can insert a small piece of paper (10x17mm) on the side for labelling. This is then also readable through the transparent material.
As with the original box, a piece of 1.75mm thick filament serves as a hinge, which is melted 3-4mm at both ends.
December 23, 2024:
I have added the base part in the heights 30mm and 40mm. The lids fit to all base parts.
You can find the parasolid models in the zip-file "Pillendose Parasolid.zip"
Print Settings
Supports: No
Resolution: 0,20mm
Infill: 40%
Filament: PLA, transparent for the lid