v400 Spool Holder Upgrade - Longer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a slightly longer version of the spool holder upgrade with widened tabs for a more secure fit.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 493
- Wydruki
- 4
- Wyświetlenia
- 1312
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
The original version was too short to comfortably hold my Hatchbox filament rolls. Also, the little tabs on the bottom were slightly too close together and it wouldn't snap in to place. Eventually, it would fall off. This new version is 100mm long and the locking tabs are spaced ever so slightly farther apart. You may need to press down with a little force to get it to lock in to place.
I suspect there are multiple versions of the spool holder. Mine appears to be longer than the one pictured in the original. At 100mm, it's only slightly shorter than my spool arm.