1 / 4
Monster/Ever After High Replacement Hand/wrist peg — zdjęcie 1
1 / 4

Monster/Ever After High Replacement Hand/wrist peg

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

replacement hand and wrist peg for Monster High/Ever After dolls

Ocena
0 / 5
Polubienia
33
Pobrania
327
Wydruki
0
Wyświetlenia
1439
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Re-upload of a replacement doll hand and wrist peg for Monster High and Ever After dolls. minor scaling changes from the original upload.  This STL is for the right hand only, but you can make the left one by mirroring the STL in your slicer. photos shown are straight off the printer with only the supports removed, and no cleanup/sanding. Recommend printing this palm down with a raft and minimal supports. may or may not have to use a raft on the peg, depending on your machine. Also recommend setting minimum travel after retraction to 0 to avoid stringing in between the fingers.

Print Settings:

Slicer: PrusaSlicer 2.5.0

Printer brand: Creality

Printer: Ender 3 v2

Rafts: Yes

Supports: Yes

Resolution: 0.08mm

Infill: 100%

Filament brand: Hatchbox

Filament color: White

Filament material: PLA

Tagi