Soap Pump Stops
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soap dispenser stoppers for storage
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
As we begin to put holiday decorations away, the better three-quarters asked me to model up some soap pump stoppers. Basically, the pump soap dispensers we used around the holidays do not have a thread to lock the pump in place. These stoppers prevent the pump for being depressed while in storage. Which allows for the soap to not be drained before putting them in storage.
These are currently modelled in SolidWorks, but should easily be modified in Fusion to adjust for pump diameter and height.
I have used the same based model and modified it for five different designs.
As for printing, the 0.070" wall thickness does not require anything special. The perimeters tend to separate during the spreading, but after several snaps in place, there hasn't been any breaks yet!