M & M Sorter Modifications for Secondary Funnel and Final Divider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified these two elements of the M&M Sorter by Jackofalltrades_, found on Instructables.com.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
While building this M&M Sorter, I found that the Secondary Funnel and Final Divider didn't fit well with my standard servo. So made some slight adjustments so that they now fit correctly and the two parts will be a mere 1mm from each other and fit snugly without binding.
I also modified the case for the Pro Micro and Stepper Driver so that the fitment would match with the spacers provided by NotBob in his remix.
And lastly, I made a number of code changes that correspond to the pinouts of the Pro Micro (and hand-drawn wiring sketch). These changes now allow the machine to run in the correct direction, be better at recognizing an empty chamber and proper movement of the stepper (upper) and the servo (lower).