1 / 5
MFLB Battery Clip — zdjęcie 1
1 / 5

MFLB Battery Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip attaches to Launch Box and will hold a battery with the box. Useful for keeping a battery with the box when it’s…

Ocena
0 / 5
Polubienia
2
Pobrania
10
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Clip attaches to Launch Box and will hold a battery with the box.

Useful for keeping a battery with the box when it’s in a pocket or bag.

Use strong PLA, (pla+, etc.), for this print, good layer bonding is important.

Print Settings

Printer Brand:

Printrbot

Printer:

Printrbot Simple Metal

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

.1 mm for stronger layer bonding

Infill:

30

Notes:

The print can be printed without supports, but I use supports in the center hole, most printers can print the 45 degree parts pretty well.

Post-Printing

Clean up Battery Channel

Clean any drooping material from the overhangs that may cause the battery to not seat correctly in the channel.

Category: Hobby

Tagi