Magnetic Spool Drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1xDrawer / 2xDrawer for Extrudr spools with labelling field. The spools are holded by neodym magnets (d: 10mm, h:…
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 1344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
1xDrawer / 2xDrawer for Extrudr spools with labelling field.
The spools are holded by neodym magnets (d: 10mm, h: 10mm). you can rotate each attached spool seperatly.
You can attach as many spools as you want and remove or re-sort them anytime as well.
Spool dimensions:
outer diameter: ~200 mm
inner diameter: ~104.6 mm
spool hole diameter: 53 mm
spool height: 66 mm
required:
- I have used M4 x 25 mm screws but shorter screws should work too.
- Neodym magnets (d: 10mm, h: 10mm). For each spool are 2 magnets required and additionally 1 magnet for the base.
Print Settings
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.3
Infill:
20-30 %
Notes:
printing time per drawer: ~ 2h,
printing speed: 100 mm/s
Category: Office