Hearing Aid Case (Phonak)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a NuEar hearing aid case.
- Ocena
- 4 / 5
- Polubienia
- 22
- Pobrania
- 177
- Wydruki
- 1
- Wyświetlenia
- 1604
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Case much smarter than original BOXES.
Neodym magnets act like hinges. This is very helpful, but be careful to insert the Neodyms correctly! Box is smaller and smarter than original box, but has no built-in charging feature.
Lid is made for individual text, you need to use the plain lid an individualize it, or just print in one color. The little batterie holder is printed in PETG (for some flexibility, rather than being brittle like PLA) and glued into the lid's recessed area.
Most likely you will need to modify the mould for the hearing aids, as they were fitting a certain build of hearing aids.
As files you can select plain lid or need to individualize the lid.
Boxes are available in 22.5mm and 25.0mm, depending on your needs.
Printed on my Prusa MK3S+ with MMU2s.