PrusaBirdHouse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Birdhouse or nestbox made with a Prusament spool, addin few printed pieces and nail it to a tree.
- Ocena
- 0 / 5
- Polubienia
- 58
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 1491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Birdhouse or nestbox made with a Prusament spool, addin few printed pieces and nail it to a tree.
Birds will enjoy the futuristic PrusaBirdHouse ! the others bird of the neighborhood will be jealous !
Print instructions
Modeling
I've modeled the part the way it wont need support (45° overhang ftw)
STL FILES
The slt on this projects are already well oriented.
Place them at your convenience on the bed and let's go !
0.35 layer height is ok for the frame, but 0.2 layer height is recommended for the entrance stick (center name part)
i've personnaly finnaly remplaced the stick by a screw
edit 1 :
modified the "exterior perimeter" part
same holes was used to slot the piece in the pursament pool