ASUS Prime AP201 Short Replacement Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement foot for ASUS Prime AP201 computer case to shorten overall case height.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 1386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
The lovely Asus Prime AP201 computer case was slightly too tall for the shelf it lives on, so I printed these slightly shorter feet. They reduce the foot height by 14.5mm, can re-use the same screws and non-slip pads, and allow a bit more room for a screwdriver. The case’s magnetic dust filter still fits fine with a little bit of ground clearance.
Printed solid in Galaxy Black Prusament PETG with supports on the bed. Supports removed easily, everything fit securely, and the same non-slip pads have continued to work great even though the area for them is slightly larger now.
Model Dimensions
- foot height without nubs (as it would be installed): 10mm
- total part height with nubs: 12.5mm
- nonslip pad recess is 16.5mm square and 1.5mm deep
- base dimension (resting against metal case installed) matches original 25mm square
My rubberized non-slip pads are ~2.25mm thick, so those end up adding nearly another millimeter to the overall foot height when installed. If you want to cut fresh pads, I recommend these adhesive silicone sheets. I’ve used them for a few things and they adhere well, hold firmly—almost stick—without slipping, and don’t leave any marks on smooth surfaces.
With these feet installed, my case ends up being 345mm from top to floor with all parts installed.