Ender 5 Y axis MGN9 linear rail adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert an ender 5's Y axis to linear rails using MGN9 rails.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 1747
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A great upgrade for someone that has two spare MGN9 rails and an Ender 5. I was able to save over 60 grams over the stock V wheels and gain some rigidity along the way. The result was a 55% increase in Y accelerations without skipping steps!
This is not a perfect upgrade! MGN9 rails are the same width as the V wheel groves. An alignment tool is mandatory and care should be taken to make sure the rails do not twist inside the groves. I would not recommend purchasing MGN9 rails for this purpose, but if you have a spare set anyways it is a good use of those parts.
M5 screw holes are intentionally undersized so they can be tapped for threads.
Required hardware:
-2 MGN9 rails
-34 M3 T nuts
-34 M3*8 Socket head cap screws
-8 M3*8 button head screws
-4 M5*16 screws