Heltec Wireless Stick Lite V3 basic case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two versions of a basic case for the Wireless Stick Lite V3. Both snap together.
- Ocena
- 4 / 5
- Polubienia
- 25
- Pobrania
- 434
- Wydruki
- 1
- Wyświetlenia
- 3463
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Here are two versions of a basic case for the Wireless Stick Lite V3 with USB-C port. Both snap together.
Buttons are untested, but should work. Might need to be sanded down. They work for either case style.
Versions:
Basic case: Holes for USB-C, antenna, and buttons.
Basic+ case: Adds slots for headers (May need to be plugged in before assembling case) and case is longer and deeper so you could fit a battery inside. Any battery that is thinner than 9 mm and fits should work (Maybe a 500 mAh?)
Printing:
I used 0.2mm layer height with a 0.6mm nozzle. 10% infill. It should take about an hour. Could also be done at a finer layer height.