1 / 10
Prusa MINI 90° Bed-cable mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angeled mount & cover for the Prusa MINI's heatbed cable
- Ocena
- 4,7 / 5
- Polubienia
- 45
- Pobrania
- 221
- Wydruki
- 11
- Wyświetlenia
- 1090
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 11) (Komentarze: 13)Remiksy (0)Kolekcje (75)Powiązane
This is a remix of espr14's heatbed-cable cover thingy.
I made it a bit shorter, and put some slots in the back for a zip-tie.
V2 Update:
- It's now a bit shorter, and the top is a bit thinner.
- Added a big chamfer on the front to help with print-head clearance
V3 Update:
- Even lower profile, with proper screw- cutouts in the top.
- Cover should now stay flat and straight xD
- Removed one of the zip-tie holes in the back.
- STEP file contains PCB-model.
V4 Update:
- Added little slots for the thermistor wires on the bottom part
V5 Update 02.04.2023:
- Added lots of fillets and chamfers to make it prettier and easier to print.
V6 Update 21.02.2024:
- Added little border on the inside so it doesn't rotate around
- Updated the bottom part so it should deform less
V7 Update 23.02.2024:
- fully re-engineered bottom part so it neatly covers the terminals and doesn't deform anymore
V8 Update 04.04.2024:
- increased contact area of top part
- increased clearence for the ring terminals on the bottom part
- this helps to prevent warping when the bed is at 80°C or higher
V9 Update 12.11.2024:
- Added a countersunk version for a lower profile screw