1 / 2
Lucky 13 Skin: Goku Super Saiyan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the LUCKY 13 Printable Jointed Figure inspired by Goku from Dragon Ball Z.
- Ocena
- 5 / 5
- Polubienia
- 192
- Pobrania
- 754
- Wydruki
- 4
- Wyświetlenia
- 4911
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 4) (Komentarze: 12)Remiksy (0)Kolekcje (290)Powiązane
Thanks to snoozafones amazing Lucky 13 Printable Jointed Figure and inspired. This is a simple Goku skin that only requires one additional part.
Assembly
You will need all of the original Lucky 13 Printable Jointed Figure regular parts in the following colours:
Beige
- 00A01 armature head.stl
- 00A02 armature neck.stl
- 00A09L armature upper arm left.stl
- 00A09R armature upper arm right.stl
- 00A10L armature forearm left.stl
- 00A10R armature forearm right.stl
- [A2] hands.stl
- 00B01 skin head.stl
- 00B02 skin neck.stl
Blue
- 00B03 skin chest 1.stl (If you want to keep the “13” logo)
- 00B05 skin abdomen.stl OR 00B05B skin abdomen for display base.stl
- 00B17 [2X] skin foot.stl
- 00A15L armature foot left.stl
- 00A15R armature foot right.stl
- 00B07 [2X] skin shoulder.stl
- 00B09 [2X] skin forearm.stl
Orange
- 00A03 armature chest.stl
- 00A04 armature abdomen.stl OR 00A04B armature abdomen for display base.stl
- 00A05 armature waist.stl
- 00A06 armature hips.stl
- 00A07 [2X] armature clavicle.stl
- 00A08 [2X] armature shoulder.stl
- 00A11 [2X] armature glute.stl
- 00A12 [2X] armature thigh.stl
- 00A13 [2X] armature knee.stl
- 00A14 [2X] armature shin.stl
- 00B04 skin chest 2.stl
- 00B06 skin waist.stl
- 00B11 [2X] skin glute.stl
- 00B12 [2X] skin thigh 1.stl
- 00B13 [2X] skin thigh 2.stl
- 00B14 [2X] skin knee.stl
- 00B15 [2X] skin shin 1.stl
- 00B16 [2X] skin shin 2.stl
Yellow
Attaching the hair piece is as simple as just pushing it down on the head. It's a snug fit so no glue is required. Be careful when pushing down as the hair is sharp!

Disclaimer
- The remix pieces are sized based on my printers tolerance (which isn't the best) so you may have to resize/scale some pieces to “snap” or just use glue.
- The hair is a remix of: https://thangs.com/designer/Rhys%20does%203dprinting/3d-model/lego%20goku%20hair-74678