V4 3d printable wind turbine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A working wind turbine that can be mounted on a fence post with printable bearings that freely rotate.Great garden decor
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 519
- Wydruki
- 1
- Wyświetlenia
- 2920
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
THIS MODEL IS OUTDATED.
There is a newer version available:
https://makerworld.com/en/models/550884
The latest version of my wind turbine. After taking feedback from some others who made the V3 I have improved this design in a few major ways.
I have fixed the blades. The pictures are not fully updated yet however they are now the correct way round.
The first improvement I made was to clean up the tolerances on the ‘bearings’ so that there was slightly less wobble.
The second was to actually balance the turbine since I completely forgot about that in the first version…
And last but not least I have changed the design of the blades to be more realistic and also slightly more efficient, in terms of getting it to spin faster. I also made it able to print them separately to print them vertically for a better surface finish.
There have also been a few minor changes to clean up the whole look.