Combustion lining with extra supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the combustion lining part for the 3D printable jet engine, inspired from:…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
This is a remix of the combustion lining part for the 3D printable jet engine, inspired from: https://www.thingiverse.com/thing:2441852
The top of the support has horizontal protrusions to fully support the otherwise unsupported part.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
25
Filament: eSUN PLA+ Fire Engine Red
Notes:
The support itself is 0.4mm wide (i.e single perimeter with a 0.4mm nozzle), so some slicer settings may need to be tweaked so that the support does not get discarded.
* To slice with PrusaSlicer you will need to enable the "Detect thin walls" setting. * To slice with Simplify3D you will need to set "Allow single extrusion walls" in the "External Thin Wall Type" setting in the Advanced tab of the FFF settings. * Cura seems to be able to slice the model just fine without tweaking any settings.Category: Engineering