BeeTheFirst+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have my printer an ln time ago, but the noisy drivers and the software were too annoying! Then i changed the eletronic
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
In this mod, I have changed the way to assemble the stock electronics, use this modification if it is ok to crimp your own cables and mess deeply with 3dprinters if you are a new user don't try these is more likely that you will damage your printer than upgrade it!
I have used Klipper! as a firmware you can see the code on the files
I have used a Bigtreetech board Mantha 4p whit TMC drivers on standalone because the drivers I have in stock are de 2208 and they are standalone only and for it is they are competent.
Material:
I think the best one is like prusament pc I have used the prusament pc-cf of course that you have to print the parts in another printer.
Resolution:
I have printed on 0,6 nozzle on 0.3 layer height and with no problems!