1 / 1
CM3D and Vertex Extruder Spacer (aligned with filament path) - F365 File included
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers to adjust the filament path of the extruder
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a spacer for the extruder to improve filament path. The gears had to much play and caused many problems (especially with TPU). There are 3 spacers, you have to find out which one fits best for your gear set. The number in the file is the thickness of the spacer
- 0.4mm
- 0.8mm
- 1.0mm
For more details please check my previous model with all the pictures. Make sure that you also use the remix of the extruder level. I needed both files to get it to work
https://www.printables.com/model/231989-cm3d-and-vertex-extruder-lever-remix-aligned-with-