Bambu Lab AMS Spool Adapter for Sunlu 250g Bambulab
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambu Lab AMS Spool Adapter for Sunlu 250g Bambulab
- Ocena
- 4 / 5
- Polubienia
- 105
- Pobrania
- 1985
- Wydruki
- 7
- Wyświetlenia
- 10 471
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Bambu Lab AMS Spool Adapter for Sunlu 250g filament
27/11/2023:
I added some minor changes to reduce the bouncing when winding/rewinding a nearly empty spool.
Spool 195mm v12
--------------
I kinda reinvented the wheel.
I was surprised I couldn't find a ready to print spool adapter for this brand
This spool adapter works only for SUNLU's 250g filament spool (Ø 11.8mm - centre hole Ø 4.2mm) that is too small to sit well inside the AMS
This is a lightweight faster and easy to print.
The AMS was able to wind/rewind and load/unload the spool with no issue.
It was printed at 0.28mm with PETG with 15% infill, in less than an hour.
A single print that works on both sides (L/R) of the spool.
Not stylish, I know.