Base for Warpsters Automatic Filament Rewinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cut model of the boards so it can be printed on a 25cm bed.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 173
- Wydruki
- 3
- Wyświetlenia
- 828
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
For the Automatic filament Rewinder design Warpster has made his base out of wood. Since I do not have a CNC machine I wanted to make this base out of plastic.
But none of my printers have a printbed large enough to print the base that is 45 cm wide. So I split the 2 boards in fusion with a dovetail cut. This way it will fit well and have an extra strong hold. Better than a strait split. My own print had a nice snug fit. Just a little push to get it to lock in to each other. I did use some superglue to make sure it will not come loose.
I printed it with a 40% infill to make it strong and heavy enough to stand solid when running the machine. The total weight is about 1.5 kg.
The files have a “Full” board size for those that do have a printbed large enough to print 45 cm and the “Half” sizes that will require a printbed of minimum 25cm. See the filenames for which you will need.