Tactical, Belt-Mounted Sriracha Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a gag joke for a police officer that I see regularly who loves Sriracha packets. It's based on the familiar…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 704
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a gag joke for a police officer that I see regularly who loves Sriracha packets. It's based on the familiar Tactical, Belt-Mounted Egg Holder in general concept (it holds things and goes on a belt), but otherwise is my own design.
I've modified the design slightly from the original version. The belt loop catch is easier to print without supports and is wider to fit on those giant belts. I also shortened the height to about 100mm/4" for more rapid Sriracha access under lunchtime pressure.
Hope you're well, Adam.
I recommend printing this in heat-tolerant plastic if you plan to use it functionally. If it will be exposed to sunlight, you'll need to print it in ASA or another UV-stable plastic.
Use Adaptive Layer heights for speed and decent quality with the threads. I recommend 0.2mm layers with a max deviation of 0.08mm. This will build the body at 0.28mm layers and the threads and 0.12mm.
Category: Tool Holders & Boxes