Corded Electric Hair Trimmer Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for a corded hair trimmer. It was made specifically for a generic Wahl trimmer, but anything under…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a holder for a corded hair trimmer. It was made specifically for a generic Wahl trimmer, but anything under 50mm wide at the waist will work.
Update 4/29/2021:
I've uploaded a new version that is much sturdier. I recommend printing it with 20% gyroid infill and three perimeters.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20% Gyroid
Filament: 3DFuel PLA Black Post-Printing =============
Two screws are needed. Anything that can fit a 4mm hole will work.
Category: Bathroom