1 / 4
Eyeglasses Holder with compliant mechanism clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the glasses firmly in place
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 592
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (30)Powiązane
For use on desks and cupboards. The clip is bi-stable; ie. it will remain stable in open or closed position. Dimensions approx. H 83mm (3.3") W 63mm (2.5") D 56mm (2.2")
| Changelog | ||
|---|---|---|
| 2023-01-01 | v2 | design improvements |
| 2022-12-31 | v1 | initial public release |
Production
No supports needed; has to be printed with parameters provided in the 3mf file. Consists of two parts: the body and the ring clip.
Assembly
Assemble by pushing the clip into the body's guide.

You may use the edge of a table top to support inserting the clip in the guide.
Should the dimensions of your glasses need another clip size, here is some choice:

All Guide_1 clips will fit the Eyeglasses Holder.