1 / 2
Mid-century Modern Lamp Shade and Stand - Honeycomb — zdjęcie 1
1 / 2

Mid-century Modern Lamp Shade and Stand - Honeycomb

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fan requested and delivered. This vintage model brings back all the feels of shag carpet on your feet.

Ocena
4,667 / 5
Polubienia
253
Pobrania
684
Wydruki
3
Wyświetlenia
4098
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution

UPDATE:

 

A new update for all you Bambu Users.  Also I created a new stand for this model as well

 

Use this for the lightbulb holder : AMAZON LINK

and 

Use this for the lightbulb (tall skinny Edison bulb):  AMAZON LINK

 

 

This gorgeous design was inspired from a reddit post.  This brings back all the disco music, shag carpet, and favorite activities as soon as you lay your eyes on this beauty.

 

Don't let the pictures fool you, this is a tall print.  The shade alone is pushing 320 mm tall.  I have designed it to print in 2 parts as I only have an Ender3pro.  I did however include a CR-10 or for your taller printers a full scale connected version as well.  You shouldn't have any issues printing it as it is.  Vase mode will not work but the inner wall is thin enough that you shouldn't have issues with using a lot of filament.  With the FilamentFriday superfast .28 layer height profile on cura I was able to knock out the top and bottom in a little over 5.5 hrs total print time.

 

Printing: When you print the design you need to print the top wide to small and the bottom small to wide. 

 

EDIT:  Added chamfers to the rounds to make them print easier.

 

You are going to want to use a tall and skinny lightbulb like this one with this design.  Once it is on the stand your hand will probably not fit through the top of the design.

 

Happy Printing

 

Tagi