Cosori Filament Dryer Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds approx 100mm height to the Cosori CO165-FD Food Dehydrator, providing plenty of room to dry a roll of filament.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 83
- Wydruki
- 3
- Wyświetlenia
- 1154
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Adds approx 100mm height to the Cosori CO165-FD Food Dehydrator, providing plenty of room to dry a roll of filament.
Requires 6 segments. Segments are connected using a friction fit. Use a rubber mallet to gently tap the seams of the segments together.
The test file can be used to test that your printer can handle the tolerance in the connection between segments (the test segments won't be perfectly flush at the top, this is fixed in the full size version).
Flip the model upside down and enable rafts and supports. There should just be two tiny supports at either end.
I printed using clear PETG with 3 perimeters and 0% infill, which provides plenty of strength for this application.