Android IP Camera printer Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A smartphone holder you can mount on the X axis belt tensioner to monitor your printing process
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A smartphone holder you can mount on the X axis belt tensioner to monitor your printing process. It is made out of 2 parts, so you can design your own thing.
For this type, you will need 3 10X5mm neodimium magnets and some electrical (rubber)tape. The tape is required to increase the adhesion of the smartphone to the printer.
Changes on the V2 version:
- shorter arms
- inversed holes for the screws. The nut should now be below
- included fusion360 files in case you need to adapt it for yours.
Screw and nut: M4, 45mm and DIN557 GB39 M4
https://www.aliexpress.com/item/4000075591731.html?spm=a2g0s.9042311.0.0.27424c4dmNbeOq
https://www.aliexpress.com/item/32875607040.html?spm=a2g0s.9042311.0.0.27424c4dmNbeOq