Tenlog TL-D3 Pro Webcam Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple webcam mount that attaches to the side of the Tenlog TL-D3 Pro. Bolts needed.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 55
- Wydruki
- 3
- Wyświetlenia
- 441
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple webcam mount that attaches to the side of the Tenlog TL-D3 Pro. It's remixed from a CR-10-compatible model that I've used for a long time.
Attach to Printer
This attaches to the printer using the mounting holes in the power supply. Replace the two screws holding the power supply to the frame with two M4*8 screws that pass through the print and into the mounting holes.
Attach Webcam
Your webcam will need a female tripod insert. Many have them, though, they might be covered by a rubber plug like on my Logitech C615. Pass a 1/4-20 UNC bolt through the print and screw into the webcam. You can either use a bolt of exactly the right size, or add a nut snug up against the print to stop the camera from rotating.