Enclosure back center spool holder - base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable base of the spool holder for your Original Prusa Enclosure. Note you need to have injection moulded part.
- Ocena
- 4,5 / 5
- Polubienia
- 19
- Pobrania
- 70
- Wydruki
- 3
- Wyświetlenia
- 772
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Description:
Accessory for Original Prusa Enclosure that allows you to mount filament spool to the back center position of the enclosure.
Note you need to have injection moulded part or you can print one your self (for example: https://www.printables.com/model/286213-prusa-enclosure-spool-holder-rod-arm ).
There is left-right version of the holder. If you have Advanced filtration system add-on installed you need Left version of the holder. Right version will not fit!
To mount the spool holder you will need the following fasteners (included in spare parts of the enclosure or printer kit).
- M3x10 screw (2x) - longer screws up to 16mm will work too
- M3nS nut (2x)
Printing:
PETG, 0.3mm layer, 15% gyroid infill, 4 perimeters
Remixes:
I've made this model in online CAD software Onshape. Here is a link.
Notes:
I'm using it together with my remix of filament guide.