Round thermometer with hygrometer for Prusa Mini +
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Round thermometer with hygrometer for Prusa Mini + designed in the same design as the control panel
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Round thermometer with hygrometer for Prusa Mini +
It is designed in the same design as the Mini+ control panel. It consists of a bracket attached to the Al profile of the Y axis and a hinged panel with a thermometer. Both parts are connected by an M3x25 screw and an M3 nut. I didn't have a square nut for the Al profile, so I designed the console as an inserted part in the groove of the profile. For installation, it is necessary to unscrew the front face of the Y-axis and insert the console into the groove. After assembly, I recommend calibrating the first layer.
Material: PETG
Layer: 0.2
without supports
Printed on textured backing for a nicer look.
if you like the model please rate me