1 / 3
Vixen-style dovetail adaptor for finder scope
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vixen-style dovetail adaptor for finder scope. An M4 nut is needed for the lockscrew. The nut is tight fit, it can be…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Vixen-style dovetail adaptor for finder scope.
An M4 nut is needed for the lockscrew. The nut is tight fit, it can be slowly pulled in the hole with an M4 screw (after printing of course).
I printed mine in PETG, 4-5 perimeters and 20% gyroid infill.
Fusion360 .f3d file in included as well.
Category: Hobby