Bahtinov mask for Skywatcher EvoStar 150mm ED 150/1200 refractor telescope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bahtinov mask for Skywatcher EvoStar 150mm ED 150/1200 refractor telescope Splitable Bahtinov Mask Generator by Ryoko…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 640
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Bahtinov mask for Skywatcher EvoStar 150mm ED 150/1200 refractor telescope
Splitable Bahtinov Mask Generator by Ryoko .scad file customzied in SCAD.
Wall thickness is 3mm.
Not a snug fit to avoid problems with shrinking on cold nights.
The diameter is 192mm as far as I remember. I posted 2 STL files, both were generated with the same settings, except one is a single piece, the other is a splitted version for smaller printers, like my Prusa Mini.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
25%
Filament: Prusament PLA
Category: Other